Sooner or later on surface of timber or metal door greasy spots which worsen exterior of interior of the house can be formed. As a rule, they appear on those places where we most often catch hands – that is about the handle. From below on door the greasy spots can be formed from the children's soiled palms. As to remove greasy spots from door and to return it original state?
It is required to you
- - Vinegar,
- - clay,
- - potatoes,
- - clean napkins,
- - talc,
- - liquid detergent.
Instruction
1. If greasy spots spoil exterior of timber door, and its surface is not painted, in this case it is worth applying to its cleaning structure from vinegar and clay. Take vinegar and mix it with the same amount of ordinary clay. Uniform liquid gruel which and needs to be applied on greasy spot has to turn out. Wait until it completely dries then accurately wash away by means of warm water. Before applying this means, try to make this procedure on less noticeable site of door to avoid undesirable results.
2. For elimination of greasy spots from polished surface of timber door you will be helped by normal crude potatoes. For this purpose wash potato and cut it in half, one half properly rub the place of pollution and after a while wash away clear and warm water. If after this method there were small stains, fill small amount of flour on door surface. Then remove it with small piece of fabric, the wetted in vegetable oil. Not less effectively talc which it is necessary to process wooden surface eliminates greasy spots.
3. If greasy spots fresh, then it is possible to remove them. With it you will be helped by liquid detergent for washing of ware. Moisten damp sponge in this means and, properly, wash the place of pollution. After that wash away foam clear water and wipe with dry and clean napkin. On the painted door you can remove greasy spots by means of vinegar which it is necessary to process them and to wait for full absorption.
4. If you were helped by any above-mentioned council, in this case it is necessary to update door completely. For this purpose it is necessary tree remove the old varnished covering. Grind surface brush of average rigidity and walk sandpaper or sanding paper. Clean door from the remains of garbage and dust. It was necessary only to cover the processed door with uniform varnish coat and your door as new again.