Disputes of mold fungus are ubiquitous, they strike everyone and everything. They can be causative agents of diseases of various weight, beginning from allergy and finishing with oncological formations. Therefore, having noticed mouldy formations on ceilings, walls or wall-paper, urgently undertake measures for its elimination!
It is required to you
- The palette, abrasive paper, gloves, sponge, respirator, solution for removal of mold, antiseptic solution.
Instruction
1. First of all it is necessary to find and, whenever possible, to eliminate emergence reasonsfungusmold . Basic reason of emergence of mold - the increased humidity. If in the apartment damp, emergence of mold is inevitable. Plastic windows, lack of ventilation and many other things can serve as favorable factor for emergence of the increased humidity in the apartment. The humidity and dampness on walls can take place because of defects in construction of the house or repair - lack of isolation in seams between house panels, use of raw construction materials, not respect for norms of construction, violation of technology and so on.
2. If the blue stain fungus has appeared has acted on wall-paper, then it does not mean that it is enough to process only surface of wall-paper or just to replace them with new. Actually, it is quite possible that it has very long time ago begun to develop on the wall and disputes of mold could begin to eat in its structure. Therefore, first of all remove wall-paper struck with mold, and together with them layer of putty and plaster in case they became friable under the influence of fungus.
3. As it is possible fully for zashkurta the site of wall struck with mold.
4. By means of sponge process special solution for removal of mold (biocide and others) all wall surface, including affected area. Instead of this solution it is possible to use more traditional options, for example, hydrogen peroxide or vinegar.
5. After 5 hours carry out repeated processing of surface by the same means. For bigger efficiency it is necessary to carry out processing of the sites struck with mold not less than five times.
6. Further produce wall surface primer antiseptic solution.
7. Having done all above-mentioned, you can start alignment of wall surface.