Modern plastic windows – the hi-tech products created with use of the most advanced achievements of science and technology. For protection against potential damages, scratches and dust when transporting windows the special protective film is used. After mounting the covering should be removed that it did not spoil type of window, otherwise over time the film can "stick" firmly to profile.
It is required to you
- - special scraper;
- - construction hair dryer;
- - stationery knife;
- - means for cleaning of windows.
Instruction
1. If windows are established recently, then, most likely, the film has not managed to be deformed under the influence of Wednesday and sunshine yet. In this case carefully cut film with stationery knife from internal and outer end of window. As a rule, right after mounting of windows the removal of film is possible.
2. Start removal of film from outer side of window beforehand, before its installation. Otherwise after installation you should do it of uncomfortable and dangerous position subsequently.
3. If the film "has stuck" and is not removed entirely, and is torn in parts, process surface the construction hair dryer. When the film is softened, by means of scraper for cooking surfaces separate covering from profile. At the same time cling film for edges and small parts scrape off from window. Such special scraper at the accurate address practically does not leave marks and scratches on plasticity.
4. Remove the remains of glue structure from window surface with warm soapsuds or special Cosmofen cleaner. Process means the window surface which is earlier covered with film, and some time wait. The specified structure also with success can be applied to removal of small accidental scratches from the surface of plastic.
5. After the cleaning agent dries up, remove solution with damp rag, and then wipe dry. When processing protect hands rubber gloves. Try that means for washing did not get on rubber sealants and window hinges. If it did not manage to be avoided nevertheless, at once wipe accessories with dry rag.
6. Be careful to use powdery cleaning agents and solvents (acetone, gasoline, etc.) for removal of the remains of film and adhesive substance. After their use the surface of window can change color and becomes rough.