Quite often people have question connected with removal of stamps from sheets of paper. It is quite simple to make it. At the moment there are several ways of removal of stamps. It is only necessary to know recipes for liquids for removal of unnecessary stamps.
Instruction
1. To make liquid, it is necessary to take acetic concentrate of 70% and small amount of potassium permanganate in crystal look. These medicines mix up. Liquid is ready to application.
2. Under leaf from which you need to remove stamp enclose blank clean sheet of paper. Take brush and dip it into the prepared liquid. You drive it on inscription until it completely does not disappear. In the place of processing, paper will get brown shade. Will get rid of it simply. It is necessary to moisten cotton wool piece in hydrogen peroxide. These components can be got practically in any pharmacy. After such processing the site of the wetted leaf needs to be ironed the iron. The iron has to have clean surface. If there are black spots, then on wet leaf from above it is the best of all to put blank clean sheet of paper and to iron.
3. In this way it is possible to remove inscription from thin plates. If you need to remove stamp from thick dense sheets, then it is recommended to use the ground match instead of brush. Reel up cotton wool piece on edged tip. Then moisten it in liquid. After that circle with the progressive and returnable movement on inscription it. All the rest is carried out similarly.
4. There is one more way. For this purpose it is necessary to be engaged in preparation of two solutions. To prepare the first solution it is necessary to add to the distilled water small proportions potassium permanganate. It has to be dissolved completely. After solution becomes saturated, it is possible to add ice acetic acid. Consider, solution at storage can lose the activity. It is necessary to train him just before application. After that it is possible to pass to preparation of the second solution. Add 1-2 tablets of the hydroperit to the distilled water. It is ready.
5. Further it is possible to try to apply them. Apply with thin cotton tampon on glass stick the first solution on the deleted spot. In 10-15 seconds repeat processing. Then it is necessary to decolour spot from this solution. For this purpose use the second solution.