Car owners have already got used to frequent malfunctions of the conditioner, however its failure can be connected not only with the long term of operation, but also with the internal device. Most often the problem with the electromagnetic sleeve of the compressor becomes the cause of breakage. It is quite possible to remove and replace it independently by means of make-shifts.
One of common causes of failure of the conditioner in the car is not working electromagnet thanks to which pulling of clamp plate to the rotating pulley is carried out owing to what the compressor enters gearing and the system is usually started.
To change the compressor coupling in house conditions, using improvised tools, certainly, really. For this purpose it is necessary to exercise judgment in business and to prepare all necessary materials in advance.
How to remove the coupling from the compressor
Algorithm of step-by-step performance of task: 1. It is necessary to remove protection of the engine to provide additional space and to receive plastic boot.2. Take off polywedge belt. For this purpose it is necessary to take away key tension roller, to record it and to freely take off belt.3. Remove the generator, having disconnected all wire.4 in advance. Further you will need to remove the compressor of the conditioner. He, as well as the generator, densely sits in seat therefore the probability that it is necessary to use small mount.5 is high. If in system there was coolant, hoses do not need to be disconnected from the compressor if the system empty, for greater convenience is better to remove after all hoses, at the same time having traced that dust or dirt.6 did not get to them. Further the key for pumping of shock-absorbers is required. If the ingenious thought has come to your mind – to use key from the Bulgarian, then drive away it at once, such task "cannot do" to these keys – they quickly bend. Insert key into openings to prevent turning of clamping disk, further key graggers unscrew nut. 7. By means of two screw-drivers accurately from 2 parties hook disk, it is not necessary to make special efforts, otherwise you can bend it. 8. Using special purpose tool, it is necessary to remove stopper rings (at whom is not present, also the screw-driver will fit). At first remove small stopper ring then, using the remover for bearings, remove pulley to remove it rather easily. If at you it turns out to make it, so the coupling will be removed.
What needs to be known
Removal and installation of the coupling of the compressor it has to be carried out together as nobody will manage to turn off without someone's help compressor coupling nut. Certainly, assembly of the coupling needs to be made upside-down. As shows experience, installation will take a little more time, than removal. In spite of the fact that the procedure in general seems idle time, it is better to entrust this work to professionals. The fact is that experts, as a rule, have all necessary tools and devices intended for such works. The strategy of producers today such is that, wishing not to leave the numerous service enterprises without work, the manufacturer tries to make unique almost each knot and the mechanism. In a word, each nut will be needs the key soon.