How to repair gas boiler

How to repair gas boiler

Housekeeping Hits: 134

Autonomous heating services among which gas boilers are most relevant are used in recent years both in houses, and in normal apartments. But many such devices fail over time therefore any modern owner has to know how to repair gas boiler at emergence of insignificant defects.

Instruction

1. Before repairing gas boiler, at first evaluate degree of its fault. If you have found attenuation of uvula of flame which usually always burns in standby condition, you can quite cope with this problem independently. At first study the detailed scheme of your gas boiler which is attached to this autonomous heating appliance at the time of its purchase, especially it concerns traditional boilers with pieze ignition. Then, first, establish the reason owing to which this defect sent to possible. Observing the safety measures provided for work with gas devices check column for possibility of contamination and also look at emergency operation of sensors.

2. Secondly, carrying out repair of gas boiler, at first pay attention whether the gas smell is observed about it, and whether etches boiler, and thus exclude possibility of spontaneous operation of sensors. If your gas boiler does not etch, cut off thin strip from the newspaper, check availability of draft in flue. It is quite simple to perform such operations if you have hammered flue, the paper strip just will remain immovable. If the flue is hammered with soot, urgently address to ZhEK and cause on the house of the master capable to carry out high-quality cleaning as this type of pollution leads to hit to your room of excessive amount of carbon monoxide.

3. To repair the gas boiler which is heating up during turning on in force of contamination or strong pollution of heat exchangers and also in case of significant breakage of the control panel, surely address the professionals understanding the device of this type of the gas heating equipment. Reveal this fault at operation of the sensor of overheating which protects copper coil from possible overfiring.

4. In case of detection of this defect at once switch off gas boiler, and then let's it cool down a little. If you have revealed only contamination of tube, clean it independently, washing out tube normal sour, on sale in household shops, but at the same time observe all necessary measures for safety. When you have found breakage of electronics of modern gas boiler, call the expert or at once address to the service center of the company in which you bought gas the boiler as independently you will hardly be able to eliminate such malfunctions.

Author: «MirrorInfo» Dream Team

Print