The heat-insulated floor is reliable heating services for any room: houses, office, bathroom, loggias. Such system can be installed in floors of all types. But whether it is possible to eliminate independently the malfunctions which have arisen at operation and to repair heat-insulated floor?
Instruction
1. The reasons of malfunctions of heat-insulated floor can be the most various. It both burn-out of heating cable, and failure of the sensor or temperature regulator of floor, and damage of heating cable.
2. It is the best of all to address, of course, in service group which made laying of heat-insulated floor. Contact phone numbers are always specified in the passport of system. Call service engineers and they, without opening floor, using testing equipment, will define place of failure. Then will open the site of floor of 10 by 10 cm in size and will impose the repair coupling, thereby having restored work of floor.
3. At failure of the temperature recorder the your gender will work, but only at full capacity, without shutdown at the set temperature. At the same time electricity expense considerably will raise, and you will not be able to reduce floor temperature. To replace this sensor, extend it from corrugated pipe, and on its place establish new. At the same time you should not open either floor, or walls.
4. There are cases that the old sensor is immured in floor, but is not laid in crepe paper. If it has failed, take air-temperature sensor and fix it directly under temperature regulator. It is executed in the form of semicircle with size of 3 cm in the diameter. Only consider that use of such sensor is ineffective as the heat-insulated floor will join from the movement of air, for example, from draft, and not just from warming up of floor.
5. If over time the temperature regulator has failed, to replace it will not make special work. Get new in specialized shop and establish to the place of fused.
6. You can conduct superficial repair of heat-insulated floor safely independently. Replacing of part of laminate or several ceramic tiles is carried out as normal repair works. For this purpose surely upon initial purchase of covering get several spare pieces then not to run on shops in search of suitable color.
7. The only thing that needs to be considered during such works — at all do not do deepening in tie and also you do not drill the heat-insulated floor. If for replacement of parts of floor nevertheless it is necessary to make deepenings, surely call experts who carried out mounting of heating system.
8. Consider that warranty repair of heat-insulated floor is carried out free of charge. Therefore if breakage has occurred during guarantee, it is better to call nevertheless the master, but not to make repairs by own efforts. And warranty periods are considerable; so for temperature regulators and sensors they make two years.