Now coded locks have received big distribution. They can be seen on doors of offices, warehouses and entrances. All coded locks can be separated conditionally into locks with possibility of code conversion and not recoded. At operation of the recoded locks it is recommended to change the code at least once in 3-6 months. Periodic change of the code on the coded lock raises extent of its protection.
It is required to you
- - screw-driver
Instruction
1. To recode podjezdny code zamokdlya replacements of the code from outer end of door it is necessary to dismantle the lock completely. Therefore change of the code with code lock of this type is recommended to be carried out at open door, from its internal party. In this case you just will need to remove the back panel of the locking device, without taking out all lock from door. For gaining access to quoted plates it is necessary to turn off 4 bolts which fix protective cover of the coded lock. Attentively examine the plates which are slightly acting their lock housing. Each of these plates has small cut. Cuts of plates on the buttons entering code combination are directed in lock housing, and cuts of plates of the buttons which are not participating in code combination - outside.
2. For change of the code you need to take the plates entering the real code combination and having inverted them, to establish so that from cuts looked outside. Choose desirable code combination. Take the corresponding plates. Invert them so that their cuts have been directed in the locking device. Insert plates into the lock. Fix protective cover of the lock by means of screws. The lock is recoded. It is necessary to pay attention that any combination from the digits chosen by you is suitable for opening of the castle device of this type. Let's say chosen as you digit "3", "4", "5". Suitable combinations: "345", "354", "435", "453", etc.
3. In some types of the coded recoded locks for change of the code it is necessary to change the special replaceable block.
4. In other types of the locks providing code conversion for change of the code it is necessary to do several operations. Open door and completely put forward lock crossbars. Find opening in face of the lock and insert into it special perekodirovochny key. "Drown" key in opening a little and smoothly turn it counterclockwise before click. Pay attention to what during operating time with key is strictly forbidden to touch lock crossbars. Remove perekodirovochny key from the lock. Insert into it "new" key and smoothly push lock crossbars. At the first turn the click will sound and the lock will be recoded on "new" key.