How to revet foam concrete block

How to revet foam concrete block

Foam concrete block is one of demanded construction materials, thanks to the utilization properties - it is durable, strong and inexpensive. Besides, walls of such buildings easily give in to external finishing. To give to the house attractive look, it is necessary to choose the material suitable for facing of foam-concrete blocks.

It is required to you

  • - facing material;
  • - wooden rails;
  • - solutions for processing of designs;
  • - nails;
  • - wall fastenings;
  • - palette;
  • - trowel;
  • - hammer;
  • - rigid brush;
  • - rags;
  • - brush;
  • - level;
  • - plumb;
  • - tanks;
  • - collapsible pipe rack.

Instruction

1. Choose finishing material. Exterior finish of walls from foam-concrete blocks is made by various materials: plaster structures, paints, metal siding, sheet and pogonazhny products and brick. Choose material which not only will decorate your house, but also will be able long to protect it from bad weather.

2. Use pogonazhny and sheet material. First of all, it is traditional finishing of walls lining from tree and plastic. The last has number of advantages before wooden panelka: resists to atmospheric influence, does not demand continuous processing by antiseptic and moisture protective structures and long keeps attractive look. If you have decided to make plastic finishing of walls, use vinyl siding - it is quickly mounted and has all advantages of lining from PHV. Pay attention to saydingovy panels which cornerstone the metal sheets covered with polymers are. They are resistant to weather patterns and are long in operation.

3. Establish furring. For wall decoration panels mount framework on walls. For this purpose fix on all outer surfaces wooden rails of 2.5х8 cm at distance of 30-40 cm from each other. Carefully verify vertical position of design on slope – the quality of your finishing will depend on it. Stacking plates, fix them nails in special openings. Follow the rule: for horizontal laying of siding of rail mount vertically.

4. Plaster walls. Plaster is available measure of protection of foam concrete blocks from impact of atmospheric precipitation. For increase in coupling of finishing mix spray part of solution on wall – it will make surface of rougher. After drying put the main plaster layer, observing temperature and moisture conditions during the work. Choose decorative plaster mixes for facing of foam concrete blocks. Their color is resistant to burning out, they are strong and have various impregnations in the structure.

5. Make brickwork. If you are not limited in means, stop the attention on brick facing. This finishing is strong and does not demand periodic seal of cracks, repainting and replacement of the broken elements. It is possible to use red and white brick for facing. It is important that this work was it is provided at construction of the base, otherwise it can sink under additional loading.

Author: «MirrorInfo» Dream Team


Print