Finishing with application of natural stone always looks effectively and has the mass of practical advantages. But not each type of such material can be laid independently, without making many efforts. In this case sandstone which is carried out in the form of tiles of various sizes and form perfectly proves to be. Mounting of sandstone on wall does not create any serious difficulties. And all the same the owner should study technology of laying of this facing covering at first.
How to be prepared for laying it is necessary to peschanikapodgotavlivat both working surface, and material. The working basis under stone should be cleaned from old finishing, to remove from it pollution and to eliminate the most noticeable height differences. It is also necessary to progruntovat wall that sandstone then has grappled with it better.
Preparation of stone is that tiles are sorted by the size and the invoice, and then without use of glue are displayed on horizontal surface in the suitable way. Then it will turn out to understand how subsequently facing will begin to look.
How to lay sandstone on it is necessary to stenunachinat forming of finishing from sandstone from the lower part of wall. The first row is usually spread from large elements. When fixing stone it is possible to use as special glue structure for heavy materials, and normal cement and sand mix. It is important to observe horizontal position of laying of ranks. But to seek to make seams of identical width between the next elements optional. Even it is considered that the small randomness allows facing to look more natural and more effective from sandstone. Besides, sandstone can be stacked by seamless method. In this case elements are placed end-to-end to each other, that is without formation of gaps. How to decorate finishing from peschanikachtoba the facing looked esthetically, it is necessary to jam seams special structure. Also the normal finish will be suitable for tile. The main thing that its color was in harmony with shade of finishing material. The finish is put in seams then they are given the suitable form, using for this purpose figured blade. Though it is possible to do also without this tool. Then finishing will look more naturally. When the finish dries, it will be necessary to eliminate the pollution and traces of the used solutions which have accumulated on facing. Such facing not only will decorate wall, but also will protect it from mechanical damages, moisture and other negative impacts.