With emergence of curtain tape it is possible to create the hands great design of curtains. It is necessary to pick up only correctly type of tape, to calculate the size of curtain cloth and to sew.
Right at the beginning it is necessary to decide on the choice of type of tape, the character and the drawing of folds depends on it. The less than some of assembly of tape, the fabric consumption is less, the it is more - the more magnificent the drapery will turn out. After definition it is necessary to buy the tape and threads, the most suitable on color to curtains.
Then by means of curve in upper part of curtain cloth the fabric width corresponding to width of the applied curtain tape is tucked and priutyuzhivatsya.
It is necessary to know that it is necessary to nastrachivat tape always from inner side of product, by front part of tape, at distance of 1 mm from edge. After that the tape is imposed along the turned-in edge so that the bottom edge of tape acted abroad podgiba on 1 mm. Then fabric and tape are chopped off by pins with interval about 6-10 cm, perpendicular to the laid line.
After that it is necessary to extend slightly cords at the inner edge of curtain and to stick. Then the end of tape from two parties is cut off 1.5 cm more long than curtain, turned in and chopped off by pins. After that everything needs to be stitched, densely holding fabric and tape. Lines have to be laid strictly in one direction. Turn vnimaniyeesl width of curtain tape to 4-5 cm, it pritachivatsya by two lines. The tape up to 10 cm wide demands three lines. If the tape is wider, than 10 cm, then it is sewn by four lines. Useful to sovetyprezhda than to sew tape, it is necessary to steam previously it in order to avoid shrinkage.