In recent years among fashionistas and seamstresses secret zippers use huge popularity. Thanks to such lightning fastener it is not visible on product at all. That conveniently it allows to arrange as well as on evening dress, and on any other thing, without worrying about its esthetic look at all. The fastener will be always imperceptible. The way of pritachivaniye of secret lightning differs a little from what we use, sewing normal zipper.
- Special removable claw for sewing of secret lightnings;
- Removable claw one-sided;
- Secret zipper;
- Pins or needle with thread;
- Product where the lightning will be stitched.
1. Undo secret lightning up to the end and reverse of one of the parties apply to face side of product where it is necessary to sew lightning. At the same time the edge of product has to be processed. Combine edges of product and lightning and tack lightning to fabric. It is possible to fix instead of primetyvaniye the provision of fastener by pins.
2. On the sewing machine establish claw for sewing of secret lightnings. Such claws of different types are on sale in all shops of sewing accessories. Fix provision of claw on lightning so that cloves of lightning were completely unrolled in one plane with tape of lightning. Stitch direct line most close to lightning teeth, but without taking them. Fix line, without leading up it until the end of lightning about 1 cm In the same way you pristrochit the second half of lightning, without reaching the end about 1 cm.
3. Zip. Check whether the line has exactly laid down. Put product the faces inside and combine precisely that there were no distortions of the parties. Sweep away seam from the end of lightning or pin. Put one-sided claw on the machine. As a rule, such claws are included in the package for the sewing machine. Will conveniently use it since the line has to pass closely to zipped. Arrange product so that the lightning sewn to its halves was on the one hand, and the claw was with another.
4. Stitch product through grinding, without bringing line to the place of pritachivaniye of lightning a little. Turn out product on face side. Carefully examine it. The line of the main seam and seams of lightning have to be equal and not warp. Razutyuzhte internal seam from within, and then through fabric accurately press the place of pritachivaniye of lightning outside. If the lightning is sewn qualitatively, then its availability on product will be almost imperceptible.