The person invents all new and new materials for finishing of the dwellings, but still natural wood out of competition. Lining is used long ago and has well proved when finishing in and outside of the room. It will long please with heat and solar shade of wood.
It is required to you
- - lining;
- - rails;
- - nails or brackets;
- - means for processing of tree.
Instruction
1. If walls of your house ideally equal and wooden, it is possible to beat lining directly to them. But it happens extremely seldom therefore prepare for more laborious work. Make furring of wooden rails, and already to them it is possible to fix finishing material. Quite so sheathe walls and decorative panels from plastic.
2. Consider arrangement of levels of lining. If they vertically lie, then rails of furring fix horizontally through 0.5-1 m and vice versa. The wall needs previously to be leveled. To reveal defects, use plumb and level. Make furring.
3. Between this grid and wall put mineral wool as heater. From above this material fix parobaryer. It becomes for protection against moisture and prevention of process of rotting. Attach hydroprotective film the stapler the smooth party to mineral wool, and rough to lining.
4. Cut lining on pieces of length necessary to you. Begin work from door case or from corner. If you conduct work in utility room or the shed and to you beauty is not important, it is possible to fix lining nails. Choose thin nails with small hats not to damage and to split material.
5. Accurately beat nails in grooves where they will almost not be visible. Find the tool for fastening special bracket. Process tree to keep its beauty. Use impregnation, mordant and varnish. Indoors do not use the nitrolacquer. Find ecologically safe, water deluting and alkyd structures. The surface after processing according to your desire can be glossy or opaque, it depends on the varnish choice.
6. In the narrow room spread lining across. If you work, sheathing walls on diagonal, take material with stock. At partial upholstery lining, for example, on height in one meter, from above beat or paste decorative rail or plinth. For processing of external and internal corners use special parts which can be found in the construction markets or in shops of finishing materials.