To wash blinds, to repair or move on other window, they need to be sorted. Dismantling of blinds is not so simple as it seems at first sight. It is necessary to do everything very accurately and in addition also to remember initial arrangement of all parts. Rules of assembly, installation and dismantling of blinds are described in the instruction which is attached to them, but after years the original instructions usually do not remain. In that case it is necessary to sort blinds independently.
- - camera;
- - instruction for installation and dismantling of blinds;
- - set of working tools.
1. Not to forget where the part was located and to what fastened, it is better to photograph all stages of dismantling. If there is instruction with drawings to blinds, then you can not take pictures of stages of work once again not to distract.
2. At first remove eaves. It is necessary to do it extremely accurately not to damage lameliya and the main framework. Put blinds on floor and straighten lameliya. So will easier dismantle all system.
3. In the top of design – at eaves, you will find two fixers – at the left and on the right. Pull on yourself, and then turn in different directions handles of fixers to get lameliya and cord. If you change cord, then old it is possible to cut and then it is not necessary to drag it through all lameliya that to take them.
4. Accurately get all lameliya. Put them, without bending, one on one. Dismantling is ended.
5. If you want to sort blinds just to replace cord, then it is absolutely optional to do full dismantling. To replace old cord with new, cut old cord, and without removing blinds, get its ends. Attach to old cord new (it is possible to solder by means of the lighter, to paste or sew). Length of new cord has to be four times more, than height of blinds.
6. Now drag old cord together with new through all design of blinds and as soon as you extend old cord from below, disconnect it from new, and record new cord node on bottom rail as was earlier.