Periodically in life there are situations (for example, moving) in which the ability to independently sort and collect furniture will help to keep not only means, but also healthy your back. Competently sorted cabinet will take not enough place, it is easy to transport it and perhaps again to collect, having kept its exterior.
It is required to you
- Flat-nose pliers, flat blade screwdriver, cross screw-driver, auxiliary tanks.
Instruction
1. To take out those regiments which are installed on shelf-holders. If the design of cabinet provides crossbeams, also to remove them. Then to turn off all regiments which are fastened to the cabinet body. After that to remove doors. For this purpose it is necessary to turn off the screws holding door hinges from the cabinet body.
2. To remove mezzanine if it is provided by design. For this purpose it is necessary to find the place of fastening of mezzanine to the main body of cabinet and to remove fixture (bolts, screws, clowns). Then, having raised mezzanine up (it is better to do it together), to separate it from the cabinet body. Ideally, after these manipulations the empty rectangular box of the body with back wall from plywood or fibreboard has to turn out. Then it is necessary to make enough room that there was opportunity to put cabinet horizontally on floor so that its back wall has appeared from above.
3. To examine in what way the back wall is attached. It or is fastened by screws (in this case they will need to be untwisted), or beaten by nails or brackets. Nails and brackets are removed by means of narrow chisel or the screw-driver, hooking them the edge of the plywood which is back wall. Usually the wall separates together with brackets or nails which then need to be taken out. If it has not occurred, and some fixture, having passed through plywood, remained in the cabinet body, he needs to be moved away also.
4. To step in the formed rectangular box consisting of cabinet walls. Having understood in what way cabinet walls (screws, by corners are connected among themselves, or clowns) for further dismantling it is necessary to remove fixture so that there was opportunity to remove one of short walls of rectangular box. Then in the same way the long wall is removed, in the last turn two remained walls are separated.
5. To remove all parts of fixture which have remained in the body. It is very important point, the safety of cabinet when transporting depends on it. It is necessary to remove handles, magnetics from doors, to turn off and take out loops. If parts have been fastened by clowns, to unscrew screws of clowns, from openings to take out plastic or wooden splines, shelf-holders, to turn off hooks of hangers, nickels of crossbeams, cabinet legs.