Irreplaceable attribute of each house - mirror. With its help each family member can make sure, whether all with him as it should be. Usually the mirror is hung up near the exit from the apartment. Very often the mirror is inserted into beautiful frame. But happens so that the mirror bursts or the frame spoils. In that case it is necessary to sort mirror to correct malfunction. How to make it?
It is required to you
- Soft fabric, cotton gloves with rubber pimples, screw-drivers, suckers for glass
Instruction
1. The way of dismantling of your mirror directly depends on what it type. If the mirror is built in dresser, then at first it is necessary to remove dresser from wall that it was easier to dismantle mirror. Also investigate way of fastening of your mirror. Perhaps, it is necessary to use new brackets that back to bring together him.
2. On surface where you will sort mirror, lay soft fabric. It is the best of all to start dismantling in cotton gloves with rubber pimples. Such gloves will protect your hands from cuts and grazes. Also in gloves you will not leave greasy prints on mirror surface.
3. Invert mirror front part down. Behind you will see fastenings which hold wall. It can be nails if frame from tree. If frame plastic or from other material then it fastens on screws. It is necessary to take accurately nails or to turn off screws. This procedure should be performed very accurately not to break the screw-driver or flat-nose pliers mirror frame. When you remove back wall, carefully wipe everything from dust.
4. Now it is possible to start dismantling of the mirror. After removal of back wall you will see iron fastenings. They need to be unbent accurately. At the same time it is the best of all to use the screw-driver from rubber or plastic. So you will not scratch reverse side of mirror. The mirror consists of the normal glass covered with thin layer of silver. If you unintentionally break it, then the mirror will be spoiled. In the absence of the plastic or rubber screw-driver envelop the normal screw-driver in rag. Make sure that fastenings are so unbent in the parties that will not be interfered with free extraction of mirror from frame. Now it is possible to take mirror. Suckers which you will be able accurately to take mirror leaf best of all will be suitable for this purpose. This leaf needs to be got and put on soft surface inadvertently not to scratch. Now analysis of mirror is finished.