Today many hostesses give preference to electric stoves. This results from the fact that on electric rings it is simpler to cook some dishes. And in ovens which have equipped such plates any dish does not burn, is evenly steamed and has taste of the food cooked in the Russian furnace. But as any equipment, electric stoves sometimes fail.
It is required to you
- - multimeter;
- - set of screw-drivers;
- - protective gloves;
- - knife.
Instruction
1. Define, fault is how serious. Entrust difficult types of works to professionals. In case in electric to plate the indicator "Network" does not work, there was short circuit or the indicator of energy supply burns, and rings do not heat up, it is possible to repair electric stove independently.
2. "Network" can be indicator failure cause refraction of cord in the place of its connection with wall plug, fault in contacts of the fork. For their elimination sort fork and attentively examine it. In the presence of strong damages replace it similar new.
3. At break of one of wires on fork cut off everything, located on its entrance. Smooth out the ends of wires knife and attach back. If the site with the damaged wire is not visible, ring out cord on all length, using multimeasures. Experts do not recommend to connect its separate pieces. It is desirable to replace the become useless electrocord new.
4. In case of short circuit install all handles switches in the mode "Is switched off", then in turn survey all links of electrical circuit. Use for this purpose multimeasures. For this purpose multimeasure apply one probe to the plate body, and another – to open contacts of electrical circuit. On the damaged piece the device will make characteristic sounds. Repair of electric stove is carried out by replacement of the burned contacts or the site of electrical wire.
5. If power supply on the electric stove arrives, and the ring does not heat up, check integrity of heating coil. The fused spiral, change of wires, lack of contacts with electrical wire, power adjuster faulty operation are the most common causes of malfunction. Sort plate that it was possible to examine contacts. Multimeasures will report if the heating coil has failed. In this case replace it new, as well as the failed power adjuster.