Sometimes it is required not only to collect cabinet furniture, but also to sort it to transport to other place. It is possible to sort table, having necessary tools and having attentively studied its design.
It is required to you
- - flat blade screwdriver;
- - big cross screw-driver.
Instruction
1. Getting to work, find all places of fastening of table-top with legs. Typical elements of fixing are under table-top. It to fasten to legs which can be connected among themselves by cross levels.
2. If the table is connected to other table or to "corner", turn off first of all screws (or screws) which hold couplers. Couplers have appearance of bracket or squared plate.
3. Remove couplers which connect tables. Thus, you separate table from prefixes or other furniture.
4. Weaken elements of fastening of table-top. When it is not recorded any more, start its removal from table legs.
5. Further it is necessary to weaken attachment screws of one leg in the place where it is connected to cross board which fastens them among themselves. Disconnect one leg of table. Then in the same way move away the second.
6. Put all fixing parts (accessories) in package and tie to boards of the sorted table that in case of moving the polished furniture was not scratched.
7. Take flat blade screwdriver or big cross to remove table-top. By means of these tools turn counterclockwise barabanchik (four excentric couplers). Observe turning angle about 180 degrees (approximately half-turn, no more). Clowns settle down on inside of legs closer to the table-top.
8. Usually on such couplers there is arrow index. Therefore, turning barabanchik counterclockwise, you watch that this arrow looked strictly up. This situation means that couplers are weakened. In such a way unblock all four ties which are located on table legs.
9. On one leg two fixing points which can be hidden under decorative pad under color of table can be located. Therefore before turning tie, remove plastic small circle (decorative element).
10. To separate table legs from connecting cross board, direct arrows on clowns directly towards table legs, bring them into horizontal position. Turn couplers counterclockwise.