For certain many of you thought of how to improve exterior of the country site. At the same time to adjust on it communication, to facilitate movement from one point to another. And what, if site not equal, but multilevel? There is a solution – to establish steps.
For a start we will understand what tools will be required to us for work on mounting:
- Angle meter;
- Two construction levels, 0.6 and 1.2 meters long;
- Mall for adjustment of elements;
- Brush for moistening of stone;
- Brush for alignment of seams;
- Seam fixers;
- Palette;
- Glue and finish;
- The mixer for preparation of glue and zatirochny solution;
- Steps and stone blocks.
The second step it is necessary to prepare surface. It has to be equal, without cracks. We process the basis primer, for the purpose of removal of dust and improvement of further hitch. Then we get from boxes and we display plates so that they were in harmony among themselves on color, the probability that steps will differ a little from each other is not excluded.
Having spread out tile, we get to work with back part of elements. It is necessary to remove with metal brush cement formations. After this procedure it is recommended to humidify surface with water. It is necessary to make it in order that glue has better grabbed.
Further we prepare glue solution according to the instruction. We apply its smooth with spatula on product and we level by means of the toothed palette. Too most it is necessary to make with the basis. Then we press step to the basis and we move here and there for the best coupling. In parallel we use mall for tamper. After drying up gluing tread has to stick out on 1 cm. Construction level we check availability of insignificant inclination towards descent. The stair riser is installed by the same way.
Important!
Prior to works make measurements. Some elements will demand cutting. Fill seams with finish. When the finish dries up, remove surplus with brush. On condition of performance of all steps properly, the ladder will serve to you very long time.