In life there is different vis major. Let's say you have damaged just established stretch ceiling. As it is rather difficult to repair it, it simply should be remade anew, you think. But nevertheless sometimes repair of stretch ceilings is quite possible.
Instruction
1. One of the most widespread cases of damage of stretch ceiling is its section. Though it seems that it is simply impossible to damage ceiling, but such incidents nevertheless happen. But you remember that repair in such cases is possible, only if you have established seamless fabric stretch ceilings.
2. First of all, if hole small, stick this opening with adhesive tape and call the master assembler. He will be able to evaluate all scale of the caused damage and to prompt ways of its decision.
3. The most widespread way to eliminate section is gluing together of film. At the same time it is necessary to pick up film of the same color, as ceiling in order that the seam from below was not visible. It is possible to stick hole with some original applique also. If hole not really big, in it it is possible to establish lighting equipment – the lamp or plafond.
4. Instead of adhesive tape also cullets will approach. They can also be pasted to the place of defect. After the section is strongly stuck, paint over this place paint in tone of ceiling. If the section absolutely small, then it sometimes is just sewn up with nylon threads. The sewn-up surface needs also to be painted color of ceiling.
5. Repair of stretch ceiling from PVC film will a little more difficult manage. In this case you need to know on what technology was the covering is established. If on shtapikovy, then masters repair it without problems. If the size in length no more than 20 cm, then it it is possible to tighten for ceiling perimeter. But if damages are quite considerable, then it is necessary to change all ceiling. As the profile on which the film fastens remains the same, it is necessary to pay you only for new film.
6. In case on ceiling there was gap on cloth seam, here minor repair will not help you – it is necessary to change all ceiling. The gap can happen because of low-quality material, bad welding or too big tension. In this case address to that company which established covering - they will have to change to you ceiling.