Bonding of metal reckoned with wood as process difficult and labor-consuming at all times, but today there is available set of the modern glues and primers allowing to make it at minimum of efforts.
How to stick together metal with tree by means of glue
Previously the surface both metal, and tree has to be well fat-free. Solution from two parts of sulphuric acid and one part nitric will be suitable for degreasing of metal best of all. Previously metal has to be sanded up fine-grained abrasive paper. The tree can be processed normal solvent. Then metal is well washed with clear water. It is necessary to wait so far water will dry, most without wiping surface. Later it is necessary to impose thin layer of resin adhesive on metal and on tree and to dry. In ten hours of surface grease with glue again, put under press and hold about day. Usually at the same time apply rubber glues of type 88-NP, KR-1, Zh-3, 88-H, "Elastosila-2" and "Patex". Rubber glues are convenient that surplus is easily cut off, - it gives to products presentation.
During World War II the first result on pasting of metal with tree has been received, and British have released the first planes on which the wood structures connected to metal by means of rubber glue were used.
It is also possible to stick together tree and metal silicone rod that are on sale in any hardware store. It is necessary to buy rod, to warm the lighter, to grease the surface of metal and to paste to tree.
One more popular way is bonding of wood and metal by means of epoxy resin. For example, the two-component Permabond ET515 or POXIPOL epoxy resin better known in the people as "cold welding" will approach. Still as the option will approach two-part adhesive Superkhvat. In any large hardware store there is wide range of glues which will help to solve problem of bonding of metal and tree.
How to stick together metal with tree by means of adhesive tapes
Adhesive tapes are new word in the construction industry. The complexity of bonding of metal with plastic or tree is that these materials have different coefficient of expansion by heat. Therefore the construction thought has guessed bilateral adhesive tapes on frothed basis.
If it is necessary, similar tapes quite easily are removed from firm surfaces, metal and wood without leaving behind any traces.
The range of such tapes is rather high, allowing the client to pick up that which approaches in its case in accuracy, metals and wood considerably differ on the characteristics. The adhesive tape does not place great demands on cleaning of surfaces, and the quality of bonding will be very high here. The MetalShelfTape, DUBLFIXHIGHBOND and DHB-04 adhesive tapes are most popular in the market.