How to switch-off the faulty alarm system

How to switch-off the faulty alarm system

The alarm system - security system which is installed usually on the car, to the house and so on. Alarm systems are different. Some give sound signals at unauthorized penetration into the room, others block locking elements and send the message to the console of the person on duty. Anyway, they are designed to protect the dwelling from thieves and hooligans.

Instruction

1. However very often, which is not surprising, considering modern producers, alarm systems glitch and deliver many unpleasant minutes to owners. Failure of its electronic block, unqualified installation, oxidation of contacts, wires belong to the most frequent breakages of the alarm system.

2. The failed alarm system can deliver many unpleasant minutes. Therefore it needs to be checked in service. Experts will carry out diagnostics of wires and contacts, will find out the cause of breakage, will establish new or will repair the old alarm system. But if it blocks door, "shouts" not by the voice, it needs to be disconnected independently.

3. Disconnect siren. It is usually enough to have a bite wire nippers, going from power supply unit to siren. If there are no nippers near at hand, wires can just be pulled out. If she autonomous also continues to howl after shutdown of wires, it needs to be switched off own key or to damage mechanically.

4. Find in wiring of the relay which breaks off chain, remove it. Usually the alarm system is hidden under dobor of doors or under plinth. It is possible just to trace blinking conductings of LED which goes to the alarm system block, then to find the relay of blocking and to remove it.

5. Connect wires which have been broken off by this relay, switch-off the alarm system. By the way, in modern advanced alarm systems with high class of protection contactless relays which can be located in the most unexpected places are used. Sometimes it is necessary to spend many efforts to find them. It is simpler to find chain which the blocking relay disconnects, and then to determine its location by it and to exclude from chain. There are also additional relays working only on the movement, for example. Then you should tinker with search longer.

Author: «MirrorInfo» Dream Team


Print