Need to accurately wind cable is familiar not only to those who work with computers, to electricians, operators, but also ordinary people. For certain you faced that wires from earphones and phone charging cable in bag were twisted in swallow's nest, and the computer wire constantly gets underfoot. Besides inconveniences, such storage can damage cable therefore it is necessary to learn to take up cable correctly.
It is required to you
- - cable;
- - wire, insulating tape, adhesive tape;
- - coil or Babina.
Instruction
1. If you need to wind small cable from earphones or charging of phone, arrive as follows: take earphones (charging device) in the right hand, and clamp them middle and ring finger. At the same time the forefinger and little finger will be exposed in the form of "goat". Then the left hand envelop cable around little finger, then around forefinger, around little finger, etc. again. Thus, wind with the eight all wire, having left free the small end. Envelop the end of wire eight "waist" several times and stretch tip through the turned-out loop.
2. For winding of long cable (to several meters) use the hand. Take the end of cable in the right hand, then envelop wire around hand, having hooked on it for elbow (the right hand has to be bent in elbow). Having taken detour, throw cable through palm of the right hand, through elbow, etc. again. Twirl thus all cable when you reach the end, envelop tip several times around winding, fixing design.
3. To reel up too long cable on elbow quite inconveniently therefore use for this purpose any make-shifts, for example, use legs of the inverted chair. Fixing of folded cable will be much more reliable if you use adhesive tape, insulating tape or wire, at the same time you will be able to control unwinding of cable, without disturbing all loops.
4. If you need to contract accurately very long cable (to 50 meters) so that it was not overwound, put it on the earth or on floor. Lay out big oval from all cable, then approach since one end and unroll cable on 180º that the eight has turned out. Throw one part of the eight on another, and you receive circle from two layers. Repeat all actions with twin lead. Thus put all cable.
5. If you have decided to reel up wire on the coil or Babina, attentively examine it before winding. On the coil there should not be sharp angles, it has to be streamline, it is desirable round shape, otherwise on cable zaloma will appear, and it can be even peredavlen in the course of storage. Reel up cable evenly, without allowing too strong tension and twisting.