One of the strongest and at the same time fragile materials which are often used in production, construction to life is ceramics. It is necessary to transport stoneware only taking into account properties of this material, otherwise you risk to damage or even completely to destroy them.
It is required to you
- - paper;
- - cardboard;
- - polyethylene film;
- - air and bubbly film;
- - pallets for bricks;
- - boxes;
- - adhesive tape.
Instruction
1. To transport ceramic ware, surely prepare cardboard, paper, polyethylene film or other packaging materials. To wrap plate or saucer, put it in the center of standard sheet and bend corners inside, then, holding corners with hand, trample down the rest of square to record packing. Put the first plate in packing, on it put unpacked plate, then again papered. Thus make pile of 2-12 pieces, tie up it twine or tape if there is opportunity, put plates in box. Circles or cups pack in the same way, wrapping the ends of paper inside. For them prepare box, in it put unpacked and wrapped up circles in chessboard order. Accurately pack boxes with cups and plates, stick with adhesive tape, write on box "Carefully, has flown down", specify where top and where bottom. If you are going to transport ware in large transport, for example, in the car or the truck, lay floor excelsior or lay out cardboard. For the best safety between boxes also put the softening layer.
2. To transport ceramic figures, figurines, vases and other small valuable objects, wrap them in several layers of soft paper, in fabric, in polyethylene air and bubbly film or other packaging material. Put them in box, and between them fill space with the crumpled paper. Stick box with adhesive tape and specify where top and where bottom.
3. To transport bricks, surely prepare special pallet. If there is no opportunity to buy it, make it, just nail to framework several boards, with a total area of 1020х770 (or 520) with mm. On each side make supports that it was possible to lay angle closers at an angle 45º. Then put bricks one of the ways specified in the drawing. In order to avoid damage of goods in transportation time in addition fasten bricks with packing tapes and cover with film.
4. To transport ceramic tile, put it accurate piles and lay in boxes. Stick boxes with adhesive tape and specify need of the careful treatment of her.
5. For transportation of plumbing, for example, of toilet bowls, bidet, sinks, just pack them into the boxes suitable by the size. You watch that the box steadily stood on day of the machine, did not move down and did not shake. If box too big, fill empty space with crumpled paper or rags.
6. If you are driving, carry stoneware very accurately, avoiding cross-country and bumpy roads, carefully go round all holes. At trip around the hilly or hilly terrain if you foreknow that it is necessary to drive on the abrupt mountain, take care of that boxes with ceramics did not move down and did not face in body.