Fluorescent lamps find broad application in life and on production. They are rather economic, convenient in use and are durable at proper handling of them. In order that such lamp worked long and faultlessly, at its connection it is necessary to meet certain conditions.
Instruction
1. Define what type of the fluorescent lamp is required to you. The speech can go about energy saving lamp with normal socle or lamps in the form of tubes. Connection of each type of lamps has the features.
2. Connection of energy saving lamp with socle like "minion" or with standard normal socle does not cause difficulties. Twist such lamp in cartridge the same as you do it with the normal glow lamp. Turn on the lamp to make sure of serviceability of lamp.
3. At connection of luminescent lamp tube prepare spare parts: holders, starters, cartridges for them, throttle and pusko-regulating equipment (PRE). Cartridges can be as hinged, demanding special clip, and rigid.
4. When using connection with the starter and the electromagnetic pusko-regulating equipment follow the scheme which is available on throttle. In this case PRA joins consistently with the fluorescent lamp to serve as the limiter of growth of current and to protect the device from burn-out of lamp. Check that the power of the connected throttle corresponded to the power of the fluorescent lamp.
5. If for some reason the scheme of connection is inaccessible, adhere to the following recommendations: connect phase wire to throttle, and connect the second conclusion of throttle to one of contacts of spiral of lamp. Connect other contact of the starter to one of contacts of the second spiral of lamp. Connect free contact to the second ("zero") network wire.
6. If you need to connect two fluorescent lamps, use so-called "tandem" connection. At the same time lamps join in chain consistently, and the power of throttle is selected so that to correspond to the total power of lamps which are supposed to be used in the lamp.