Liquid nails are all-purpose construction adhesive which it is possible to stick together among themselves the surfaces of various materials. In order that it is correct to use liquid nails, it is necessary to follow some rules.
It is required to you
- - special gun;
- - knife;
- - metal brush.
Instruction
1. Before the choice like liquid nails look at structure of product. If you need to stick together objects which will be outside or in rooms with the increased humidity, choose glue which part solvent is. If you needed to stick together objects in dry rooms indoors, then buy water-based acrylic liquid nails. Use liquid nails for gluing together of metal, tree, concrete, plastic, glass and other materials; the list of possible materials will be specified on packing.
2. Provide aeration of the room, having opened window or window leaf. Check air temperature if you work at the street, you learn that temperature should not be lower +4os.
3. Take construction gun and weaken working rod of the device. Twist conical tip and cut off the tip knife that the opening for glue extrusion was formed. If you have to execute pasting of the decorative planes or it is required to make gluing together in tiny execution, then you should not cut off the end of conical tip with big space from edge as the more you will cut off cone from edge, the more there will be opening for glue exit.
4. Insert the cartridge with glue into gun and draw in working rod against the stop. Be careful as at this stage you should not create strong pressure in the cartridge. Pierce control membrane nail or knife and wind conical tip on the threaded connection at glue exit point.
5. Now prepare surfaces for gluing together. In pollution case clean it, remove old sealant. If it is metal, use iron brush for its cleaning of rust. Degrease tree solvent. To prepare concrete or stone, process surface the grounding structures and let's product dry before gluing together. Remember that the connected surfaces have to be dry and degreased.
6. Apply glue on both surfaces, thin layer or points, for pasting of the most parts "draw" with glue grid or snake (especially if material heavy). Press adherend parts and leave for drying for 12-24 hours (look at the exact time in the instruction to application on packing).