The bath can be carried to constructions with special conditions of use. From that, how precisely mounting will also be correctly made, the microclimate, warm-up period and other indicators depends. How to warm ceiling in bath?
Main schemes of heat leakages
The is hotter temperature is necessary, the it will be more difficult to create rather strong barrier keeping heat. To make everything it is correct, it is necessary to study the main schemes of heat leakage:
- the movement of warm air through slots;
- transfer is warm to cold objects from hot;
- crossing by waves of heat of the barriers consisting of uniform substances (that is heat hits against basin, bucket, etc. because of what extends not so intensively).
Thermal insulation material laying in the general system of ceiling overlapping creates obstacles for all three types of heat leakages. The correct warming perfectly well will perform all that work which is assigned to it, however because of the wrong mounting on overlapping condensate will appear. It involves temperature reduction and increase in the resources spent for heating.
How to choose materials for warming
Before warming it is necessary to choose thermal insulation material. The main is the following:
- Mineral wool. Standard way. In its basalt fibers there are several billion emptiness filled with air. And each of them keeps heat. There is only one minus – unfitness to operation in case of blotting. Therefore it is worth laying vatu over waterproofing layer.
- Frothed superlight polypropylene, or penoterm. Too it is often used especially as material has been created just for arrangement of saunas and constructions. Besides warming also reflects from itself heat.
- Most of all will be suitable for big constructions with large dimensions. The layer necessary for isolation is equal to 30 centimeters. Start up it light material, but it influences the mass of design considerably.
- Heat insulator the hands. Consists of two components – pugged clay and "carpet" from leaves and sawdust. From above all this needs to be strewed with the earth.
Each of materials can become excellent protection from heat waste.
How to warm ceiling
Regardless of material, the general mounting will be approximately same. The bearing basis is beams with support on the building. The bar used for overlapping of beams before mounting needs to be processed anti-septic tank – it will protect design from fungi. After that it is necessary to carry out the following actions:
- To hem ceiling boards from rooms of bath.
- To hammer together setup boards (these are two rows of the boards which are perpendicularly on the relation to each other).
- To bottom of boards and to walls to fix vapor barrier material.
- To lift boards upward without heaters, and it is necessary to begin with those that will be established in the last turn.
- To place all elements so that the lower planes have completely coincided with beams.
- To fill guards and gaps thermal insulation material.
- From above to sew up design with boards it is perpendicular to beams.
Instead of boards use of fibreboard or self-made plates is allowed. At the same time it is possible to receive rather pleasant and comfortable way to relax in pair bath.