Between wooden or metal racks and boards of overlappings in the frame house heater which protects design from heatlosses is put. First of all it is for this purpose important to choose suitable material, but also it is necessary to lay correctly it and to isolate from moisture.
Heaters for frame houses
One of the most widespread and cheap heaters which are often used in construction of frame houses is polyfoam. It is simple to cut light, its polyfoam on pieces of the necessary size, it is easy to stack in walls, it has low moisture permeability, and in certain cases walls from polyfoam do not isolate from steam. Among its shortcomings it is possible to call not environmental friendliness, many claim that this material is noxious to health people. Also polyfoam easily burns therefore it needs to be processed fire-prevention structures.
Mineral wool too very widespread heater. This material is released in the form of plates or rolls therefore it is easy to work with it, no additional tools are necessary. Only the knife or saw and tape measure will be necessary. Minvata is fireproof, but under the influence of moisture loses the heat-insulating properties therefore walls need to be protected vapor barrier.
It is necessary to put mineral wool in walls very densely, from one rack to another without gaps, but without compressing material.
Ecocotton wool differs from minvata in the fact that it is completely natural material therefore it is used by supporters of eco-friendly houses. Ecocotton wool is on sale not in the form of plates, it should be stacked in walls in the dry or damp way, or blowing in walls, or spraying by means of special adaptation. The dry method is cheaper, but after a while ecocotton wool can shrink and will cease to keep warmly indoors.
There are also other evaporated heaters, but so far they are not spread as widely as polyfoam or the minvat. It is polyurethane foam and other structures.
Technology of warming of the frame house
Before warming country house, it is necessary to prepare framework structure: to clean walls from dirt, to remove the sticking-out nails, to dry crude sites, to close slots by means of polyurethane foam. Walls need to be covered with vapor barrier, for example the paper roof covering cut on several strips by the sizes of frame racks from within. Polyfoam is cut on plates of the necessary sizes and inserted between racks, intervals and slots are closed by polyurethane foam. Mineral wool is cut manually by means of knife and stacked with allowance in five centimeters from each party that material has densely filled space between racks. If you use minvata not in plates, and in rolls, then it is necessary to take care of that it well kept on walls. For laying of ecocotton wool it is necessary to have the special machine, this material is applied in intervals between walls on certain technology, layer by layer. Mounting is made quickly, but its main lack that only experts can carry out it correctly that increases warming cost.