As it is ideal the tile has been laid out, the last stroke remains behind finish. If it is wrong to wash it, seams will seem different therefore all exterior of laying will be spoiled.
It is required to you
- finish, rubber palette.
Instruction
1. Before you start finish of seams, make sure that between them did not remain gluing. If such places are found, you can remove surplus of glue by means of stationery knife or stopping knife. Remove glue carefully as the accidental movement can cut off gloss from edge of tile. As soon as all seams are cleaned from glue, can start their finish.
2. By means of paint brush drench seams on that site which you are going to jam for once. Prepare zatirochny mix. Let's weight stand 3-5 minutes then mix it repeatedly and start finish. At this stage for filling of seams with mix it is recommended to use the rubber palette. The finish should be hammered into seam with cross movements, and to remove its surplus longitudinal movements of the palette on seam.
3. After you process the allocated site of finish, let's it stand quietly 5-7 minutes. After this time you can start washing away of finish. At once we will note such moment. If you the woman also try to protect the nails on hands, entrust this work to other person. The long contact of palms with water will soften nails, and long movements on seams can stratify them.
4. Begin washing away of finish as follows. Initially wash surface of tiles from mix, do not touch seams until until all tile on the site processed earlier becomes clean. As soon as you clean tile, pass to washing away of finish from seams.
5. For this purpose you need fabric without fibers. Envelop fabric around forefinger in one layer. Wet the site of fabric on finger. Now you can start registration of seams. You watch that fabric remained damp. For this purpose dip it into water more often. It is necessary to run finger over seam under one corner, without changing pressure force. Otherwise seams will seem different after drying of zatirochny mix. When work is finished, walk on tile dry rag, trying not to touch seams. This action will allow you to get rid of the finish remains on tile.