The blender is the electric device combining part of functions of the mixer and food processor. In it it is convenient to crush and shake up products for preparation of puree, emulsions, mousses, cocktails and other drinks.
Instruction
1. That the blender has served to you as long as possible, it needs to be used strictly according to purpose and it is correct to store. But before moving away him in cabinet before the following use, it is necessary to wash out and dry up all parts carefully. And it is necessary to do it right after the end of preparation, especially if in the blender salty solution was shaken up.
2. Disconnect the blender from the power supply network and sort all removable parts. For a start screw together mill from the electric motor block - usually for this purpose it needs to be turned counterclockwise. After that the capacity of the device will be separated into several parts: glass, knife, sealing wheel and rubber gasket. At the same time try not to touch knife blades as they very sharp, and it is possible to be cut with them easily.
3. Clean the electric motor block with slightly damp rag. Then wash out all connecting parts under stream of warm water by means of sponge or rag from soft fabric. If necessary it is possible to use liquid for washing of ware.
4. If you have got used to use dish washer, wash removable parts in it, previously having removed from them the remains of products. Only water when washing in the machine should not be higher than 60 degrees. And concentration of cleaner from scum – absolutely small, differently it is possible to spoil the surfaces of the device.
5. After some products having saturated color, plastic parts of the blender can be painted slightly. To get rid of unnecessary shade, wipe devices with vegetable oil before their washing in dish washer.
6. Carefully dry the washed-up parts or wipe them with dry rag. Only after that the device can be collected and put again completely in cabinet to next time.
7. The technology of cleaning at different blenders can differ a little. Therefore at first study the operation manual of specific model.