The spot from varnish on fashionable and favourite thing can spoil mood for a long time. Besides usually such spots appear in the most improper place and in the most wrong time. It is very important to wash varnish, without having spoiled at the same time product. When choosing means of removal of varnish it is important to consider quality of fabric and its property.
It is required to you
- Turpentine, gasoline, kerosene, the denatured alcohol, chalk
Instruction
1. Before starting removal of spot from varnish, remove dust from product. Then enclose the wooden plate enveloped by white clean rag or several layers of gauze from inner side. So you will be able to prevent emergence on fabric of stains. For exact putting mixes and structures use the pipette or wooden stick. Conduct processing of spots by structures careful movements from edges of spot to its middle.
2. Process fresh spot from varnish turpentine, benzene, kerosene or the purified gasoline.
3. If spot old, clean it, having accurately removed crust, trying not to damage at the same time fabric. After that process the polluted place solvent, and then wash off product.
4. For difficult spots prepare structure from turpentine and gasoline in equal proportions. Apply mix on spot from varnish and leave for thirty minutes, and then wipe fabric with mix once again.
5. It is possible to remove spot from varnish from white fabric with special paste. Mix gasoline, turpentine and chalk in equal proportions. Apply the prepared paste on spot and leave for three-four hours. Then wipe fabric with acetone.
6. For removal of spots from oil varnish use the structure prepared from the denatured alcohol and the acetone taken in the ratio 1:2.
7. If primary treatment of spot has not led to its disappearance, do the procedure of cleaning several times, before receiving beneficial effect. After the end of processing of fabric by any structure surely wash product in warm water.
8. Consider that application of chemical means suits only for natural fabrics. Synthetics can melt under the influence of chemical medicines. To be in full confidence that you when processing will not spoil product, before processing of spot make experiment on piece of matter or test the recommended means from inner side of product.