In household not to do without soldering iron. It is necessary also at repair of the radio equipment, and at repair of household appliances and in many other cases the soldering iron comes to the rescue of the house master. Before use the soldering iron needs to be prepared in a special way (to zaludit) that soldering was durable and qualitative.
It is required to you
- Soldering iron, rosin, solder or tin, file
Instruction
1. Take file and apply it flatwise to soldering tip cut. Grind sting, moving file precisely to the cut planes. From time to time control look soldering tip until it becomes smooth and brilliant, without chips.
2. Turn on the soldering iron in network and wait several minutes until it is warmed. Lower the warmed sting in rosin and at once after that dip into solder. Solder will not stick to sting yet. At once after that apply soldering tip to tarry plate (for example, to fir-tree).
3. Repeat the described procedure until the soldering tip cut from color of the warmed copper does not become silvery and brilliant from the solder layer which is evenly covering it. You just zaludit the soldering iron and have prepared it for work.
4. If you have to solder copper conductings, it also should be zaludit. Remove isolation from wire and smooth out veins knife. Dip the site cleaned from isolation into rosin and apply from above the warmed soldering tip. After rosin begins to smoke, carefully take out wire from under the soldering iron outside. Now, when the melted rosin of obvolokl wire, concern soldering tip of solder and bring it to the rosin which has stuck on wire. Wire zaluzhen.