The trimming saw on its functional properties can be considered the relative disk. In essence it is also circular saw which was fixed over the bed by means of the movement mechanism.
Circular saw
At circular saw the cutting mechanism is toothed disk. It serves for longitudinal has spent on drink though by means of additional rails it is possible to dismiss cloth under various corner and to receive cross and inclined cuts. On quality has spent on drink the disk type, its diameter, form of teeths and the angle of sharpening influences. The more - the speed is less than teeths, but has spent on drink quality better. Power of circular saws fluctuates from one to two and a half kilowatts. To work on weight with some views from these tools very difficult.
Trimming saw
The trimming saw represents kind of circular or circular saw. It is applied to angular and inclined cut under various corners. Its difference from the above-mentioned models is that it is fixed in the bed which is in turn connected to work table. At the same time the disk can move up and down, keeping indicators of corner under which the cut will be made. It is possible to incline saw by means of the lever.
At such cut the cloth can be developed in the different planes, at the same time by means of guides on work table the cloth moves, without deviating the set parameters. These properties do saw of repair work, popular and demanded at implementation, it can cut tile, metal section besides wood. Besides there are combined trimming saws where the cutting disk is capable to turn for several movements by 180 degrees, and it is possible to receive full-fledged circular saw. The ability of disk to rotate allows to work with more difficult preparations.
Differences
The trimming saw is the saw intended for the numerous fixed cut of small length. Represents the small mechanism with moving electric adaptation which falls under various corner and inclination down. The circular saw is the circular hand saw for sawing up of boards, both lengthways, and across, can be fixed on the machine. At circular saw the power is more, than at trimming with disk of the same diameter because the trimming saw is intended for performance of the short cross machine cut, and disk - for performance longitudinal. Rotating speed of trimming saw almost always about 4500 revolutions per minute. Rotating speed of circular saw can vary from 3000 to 4500 revolutions per minute. Depth has spent on drink trimming saw, depending on the sizes of disk is from 40 to 130 mm., and width according to from 70 to 363 mm. Depth has spent on drink circular saw, depending on the disk sizes, is from 40 to 100 mm, and width has spent on drink - according to from 65 to 700 mm. One more useful property of trimming saw - it is possible to work as normal circular, that is to do longitudinal pro-saws. Such saw is called combined.