Interior finish in bath: mounting of mineritovy plates

Housekeeping Hits: 152

Planning carrying out construction in bath, except finishing parent material - mineritovy plate, it is necessary to prepare related products for them - glue structures, screws and tapes for seams which will surely be necessary during mounting. Actually these materials can significantly facilitate process of assembling and provide high-quality connection of parts.

Structure of mineritovy plate

The Mineritovy plate is called in a different way - ""fibrotsementny plate"". The most part in its structure there is cement which 70%. As reinforcing their 10% are added to composition of fiber of cellulose. The others - 20% fill mineral fillers: limestone, sand, mica. Spare parts can differ a little in special mineral and synthetic additives, depending on the chosen producer. The structure of such fibrotsementny plate is ideal for this purpose to have excellent qualities.

Technical characteristics of mineritovy plate

Knowing all technical characteristics, it is possible to claim safely that there is no material for finishing of bath more ideally.

Sizes

Width - 900 mm x 2550 mm; 1200 mm x 2550 mm; 900 mm x 3000 mm; 1200 mm x 3000 mm;
Thickness - 9 mm; 12 mm

Physical properties

Density - 1150 kg/m3;
Weight - 10.8 kg/sq.m; 14.4 kg/sq.m;
m weight - 9 mm - 24.8 kg; 33.0 kg; 29.2 kg; 38.9 kg. 12 mm - 33.0 kg; 44.1 kg; 38.9 kg; 51.8 kg.

Thermal characteristics

Heat conduction - 0.25 °C of W/m;
Thermal expansion coefficient - 0.007 °C of mm/m;
Specific heat capacity - 0.9 °C of kJ/kg;
Temperature range - 150 °C of max

Moisture resistance

Water absorption - 32.0%;
Swelling after 24 hours in water - 0.7%

Mounting of mineritovy plate

On average, the mass of one plywood does not exceed twenty six kilograms. It does its mounting by easier. It is possible to saw heater ordinary hacksaw, and to fix - by means of self-tapping screws or clips-klyammerov.

Mounting is made according to the following scheme:

On sweating room wall near the furnace it is necessary to establish special brackets. Their length should not be more than thickness of the minerit.
To lay out heater which fastens on special dowel umbrellas.
From above to mount framework from metal section across and verticals. On it to ustanavlivit mineritovy plates. If thickness of insulation panels does not exceed 15 mm, then for fixing it is necessary to use normal self-tapping screws. In other cases clip-on earrings-klyammery are used.
All joints need to be processed sealant. It has to be the same brand, as the panel.
If the corner was formed, then it is necessary to close it metal section.

Council - if fixture of mineritovy plates has thought by means of self-tapping screws, it is necessary to use sealing strip, having laid between the panel and framework.