Autonomous heating is used in many cottages, shops, restaurants, office buildings. Its essence consists in application of special design which provides optimum microclimate only within one building or even within several rooms.
Shortcomings of autonomous heating
The autonomous heating services can not always be installed. So, for example, in multifamily houses the central system assuming connection to the city boiler house is in most cases used. To refuse it and to choose the independent equipment in such cases often it is almost impossible or it is at least very difficult and unprofitable.
The problem is also that mounting of autonomous system demands additional expenses including expenses on work of designers and assemblers. The central system goes "in set".
Installing the equipment which will warm up air in rooms, you have to understand that it demands timely correct technical maintenance. Heating boilers, radiators, convectors require care, and it assumes additional expenses.
Advantages of autonomous heating
The most important plus of such option is that the microclimate in your house will not depend on problems which you cannot solve. Break of pipes, stops in work as the boiler house, the wrong calculation of temperature and pressure – all these difficulties will not concern you.
The exception is made by cases when the equipment using natural gas or electricity as fuel supply can be suddenly stopped is used. The choice of additional source of heat will solve problem.
The autonomous heating services will always allow you to support ideal microclimate in rooms. There will be no problems connected with too late giving of heat and its untimely shutdown. Also it is not necessary to meet difficulties because of too cold or, on the contrary, superheated heating appliances. The choice of air temperature in rooms will depend on you. When using autonomous water heating services you will have wide choice of various radiators and convectors. The fact is that many types of such devices badly maintain differential pressures in system and cannot work with the aggressive, low-quality heat carrier. In particular, it concerns steel radiators and convectors, some bimetallic models, many products of import production calculated on soft working conditions. Application of autonomous system not only will expand the choice of heating appliances, but also will allow to prolong considerably the term of their service thanks to correctly picked up equipment parameters.