For construction of owner-occupied dwelling, cottage various modern materials are offered today: brick, blocks (foam concrete block, gas-silicate and others), bar, prefabricated panels. However from what good and heatresistant stuff the house has not been built, additional warming of its walls is required inside and outside. What materials will help to carry out worthy warming of the house that heat in it remained well in the winter, and in the summer the house held cool in internal rooms?
Warming of walls of the house outside
Warming of external walls of the house is required first of all for preservation of construction material of which the house as it is known that some types of constructions do not maintain long time of impact of atmospheric precipitation, weather patterns is built.
The same gas-lime sand brick demands protection against high humidity heater which front works with application of siding, facing brick, decorative stone and other finishing materials follow.
Heater for external walls of construction will not allow to get to cold, moisture into internal rooms, will protect material of which the house is built, from manifestations of mold, fungus on it, from destruction and loss of esthetic look.
As heater in modern houses the following types of construction materials are outside applied: mineral wool, polyfoam, plaster, extruded polystyrene foam, glass wool, haydite. Such universal heater as minvat (glass wool), it is laid between the rails attached to house wall. Polyfoam and extruded polystyrene foam sit down on special glue on house walls. Haydite belongs to loose heaters therefore it is applied in pier between the main wall and additional, say, from facing brick. Plaster as the outdated, but widely applied still way of warming of external walls of the house, also enjoys wide popularity in construction and finishing of cottages.
Materials for warming of the house from within
It is required to warm correctly the house not only outside, but from within. This step is not less important external finishing work. Warming of internal walls of the house raises thermal insulation in it, maintains the normal level of humidity, temperatures. Does not allow to cool down quickly to the dwelling in the winter at warming up of its internal rooms and to heat up in the summer too soon. Among construction materials for interior finish of the house enjoy wide popularity: mineral wool (or glass wool), polyfoam, plaster.
The choice of certain material for warming of internal walls of the house means different technologies of preparation of walls for its application.
Some types of internal walls of the house are laid in addition by layers of waterproofing, sound-proof and parouderzhivayushchy film. Mineral wool would be the best choice in internal finishing work as it has practically shortcomings, no advantages. Well holds heat indoors, be it brick or assembly and panel board, it is quickly mounted on house walls, it is ecologically clean. The same polyfoam though creates good heat-insulation layer and at the price much less minvata, but it is favourite material of rodents. So, there is probability that mice will locate in the walls of the house warmed by polyfoam. Plaster belongs to quite good heaters, rather inexpensive. From minuses: plastering of walls – labor-intensive process.