_large.jpg)
Manual milling cutter – the obligatory tool for those who often work on tree. By means of the good working device it is possible to make large number of operations of processing of material, and at the special equipment it can process color materials, composites and organic glass. That the manual milling cutter has served long, it is necessary to approach its choice responsibly.
Types of milling cutters
On the mode of work distinguish the top, edging and lamellar milling cutters. In turn, the top milling cutters are divided into submersible and motionless. Submersible allow to work with mill without separation from material – the engine of the device slides on special guides and thanks to special rigid springs allows to lift and lower mill. This kind of the tool well will suit any masters, even to beginners.
The professional milling cutter differs from household in availability of extras and material which is used for production of its functional parts.
Edging milling cutters serve for processing of edges of preparations and chamfering. The lamellar device will help to make special grooves for connection of preparations.
Choice of the tool
Choosing the tool, it is necessary to pay attention to its main characteristics – the power, speed, availability of the fixing mechanism of the switch, grip, availability of function of suction of dust, quality of sole and quality of the rod mechanism. Power of the tool is defined by the fact that during the work the engine is exposed to considerable loading – the more often the tool is used, the less there will be operation term. In case with milling cutters this statement is especially relevant since fastening of all guides of parts, reducers and mill is made to the engine. Therefore, the engine, the better for devices of this type is more powerful. Also much attention should be paid to work speed – the speed, the bigger set of materials and breeds of tree is higher the tool will be able to process. The minimum frequency of turns – 7000 in minute, however some devices allow to regulate this parameter.
Low-power milling cutters heat up very quickly and have short life cycle.
When choosing the tool it is also worth paying attention to grip which is used for clip of mills. It is the best of all to buy the device with the parts executed from tempered steel. Availability of possibility of fast replacement of grip if necessary is also desirable. The ergonomics are not less important for the device – before purchase try to pick up the tool. Define whether the established rubber pads, handles are convenient, whether the button of start-up is correctly located and whether there is protection against accidental pressing. Also pay attention to availability of receiver branch pipe which will allow to connect vacuum cleaner hose to the device. Some models are initially supplied with function of suction of dust. When choosing manual milling cutter it is worth paying attention to its complete set. Whether there is parallel emphasis capable to provide uniform maintaining milling cutter whether there is sleeve and how it is fixed. It is ideal that it was supplied with fast-clamping mechanism that will give the chance to avoid some problems when processing part. The compasses for work with radial parts will become good addition to the tool. It should be noted that the device complete set is richer, the higher it the price.