If you have lost keys or have put new gate, acquisition of the new lock for gate becomes necessity. On the design the gate reminds ordinary iron door. It means, as the lock for it needs to be selected according to the similar principles.
When choosing the lock for gate it is necessary to consider that the lock always has to perform the functions regardless of weather patterns. Gates are street constructions. Therefore, the lock has to be metal-enclosed, completely protected from moisture.
Types of locks which are better for not getting
For gate it is necessary to approach selection of the lock with special care. Safety of your house and site really depends on right choice. Therefore it is better to decide on devices which you should not buy at once. It is about rack and padlocks. It is extremely unreliable protection of your property. Always was considered that the easiest to open them. Literally two seconds will be required to malefactors for opening of gate with the trailing or rack lock.
Mechanisms with cylinders and those which need to be unlocked crosswise key also do not differ in special reliability. Some owners even independently manufacture locks for gates. But similar homemade products will hardly protect your house.
Cut-in and scarves
Your attention consignment notes and box locks for gate are worthy. Usually box lock is tightly built in one of gate shutters. For its fastening the special front level is used. This part should be attached to the body of the locking device properly. By the way the optimum thickness of front level should not be less than 2.5 mm. The scarf will become good option also. On the design it a little in what differs from cut-in. However, in this case, the mechanism needs to be installed from the inside of gate. Therefore it is recommended to choose scarves with possibility of opening by key. Also when choosing laid on and cut-in locks it is necessary to consider construction features of bolts. There are two options – rods of cylindricity and rectangular metal bar. For a long time the first option of design of bolt is recognized as more reliable.
Ploskuvaldny and magnetic locks
On gate it is quite possible to put also the ploskuvaldny lock. Similar locks cannot be opened master key So with the ploskuvaldny lock on gate of thieves it is possible not to be afraid at all. Some consumers prefer to put magnetic locks. The principle of its action is that metal parts of the lock are attracted under the influence of mains voltage and hold door in closed position. It is possible to enter the room when it is powered off. For opening of such lock the malefactors should apply force equal to hundreds of kilograms. Of course, thieves can try to turn off power supply. So it is better to supply the lock with uninterrupted energy source in advance. Usually the control of magnetic locks is carried out by means of magnetic card or remotely.