The self-leveled laser level, or level, is irreplaceable in construction and other fields of its application today. The modern laser level is the plotter of the most exact planes and has set of advantages in comparison with normal tape measure, and advantages of this device completely justify its quite high cost.
Possibilities of the self-leveled laser level
The laser level has the widest range of application. With its help it is possible to create various projections across and verticals and also to project on any surface axis of coordinates in the form of point or cross. Modern models of the self-leveled laser level can project beam of the laser which has turn by 360 degrees. At the same time the projection will cover almost all room where repair or construction jobs are carried out on perimeter.
Taking into account all opportunities of use of this laser device, it is possible to call the field of its application really boundless.
The only essential lack of laser plotters of the planes is the high cost of level. So, the average price at which buy the good device intended for performance of multipurpose works today is more than 1,000 dollars.
Advantages of laser level
Thanks to the self-leveled level the performed works considerably accelerate – the marking of the ceilings and other designs made of gypsum cardboard is carried out twice quicker. At the same time need of dragging on perimeter of pipe of water level, and then repetition of movement and tension of laces disappears across. To use laser level, it is enough to make a start from laser projection tape measure and to put horizontal tags through everyone half-meter.
After drawing tags and similar way of performance of marking down it is possible to begin installation works.
One more important advantage of the laser level is its maximum measurement accuracy and constructions. In case the marking is carried out only on laser beam, without application of tape measure which carries out transfer of projection, measurements and constructions will be absolutely exact. It is rather simple to use laser level – establish it on tripod and make preliminary alignment on ground level by means of the built-in bubble levels. Then adjust the plotter of the planes, having removed stopper from the leveling device, and include the necessary projection of the laser, having used adjusting buttons (or their combinations). After the level begins to position quickly laser beam, it can be applied in the direction necessary to you.