The ordinary paint roller by means of which it is possible to paint quickly the necessary surface is fine replacement of usual brush which work is more labor-consuming. At first sight this tool is very simple adaptation, but the choice of the necessary paint roller – business at all not the simpler.
Similar devices for coloring of surfaces are separated into several types, depending on material of which rollers are manufactured and also from for what works they are adapted.
In specialized shops it is possible it is possible to buy the tool of this type with diameter of 4-8 centimeters and from 8 to 30 centimeters long.
Production material
All paint rollers are separated into four following versions: - velor;
- foam; - fur; - cotton. The first type of the tool is intended for works with emulsions and oil paints. And with its help it is possible to distribute qualitatively and evenly paint on the necessary surface. But lack of this type of paint rollers is their increased absorbency at the expense of what it is necessary to dip the tool into the painting mix often. The foam roller best of all interacts with varnishes, primers and water-glue means. This type of the tool cannot be used at all during the work with those materials for which the velor roller as in this case on surface small bubbles will be formed is suitable. Minus these devices – rather small life cycle. Cotton rollers need also to be chosen in interaction with emulsions and water emulsion means. They perfectly wash and do not leave on fiber surface.
Nevertheless this type of the tool can spray the painting means therefore it is worth working with cotton rollers carefully.
Fur rollers perfectly prove to be during the work with oil paints and enamels, qualitatively distributing funds on the painted surface of floor, walls or ceiling.
Assignment of paint rollers
By this criterion the tool is separated into rollers: - for facades; - for wall-paper; - for impressive coloring. The first type of the tool possesses additional stuffing in the interlayer and also the bearing which though slows down scrolling of the roller, but reduces risk of spraying that considerably saves the painting means. In turn, rollers for wall-paper are separated into some more subtypes: - for coloring of wall-paper with pile of average length; - the foam roller for putting glue; - rubber rollers for removal of bubbles; - rubber rollers for smoothing of wall-paper. By means of the impressive roller it is possible to apply with ease on surface the necessary drawing of decorative paint or textured plaster. For effective, quickly and neat job it is necessary to select correct type of the roller that considerably will facilitate your work and will allow to make it qualitative.