The angular cabinet can be placed only, as well as follows from the name of this piece of furniture, in corner. If you have opportunity to use angular space, choose cabinet model on capacity.
Design and capacity of cabinets
Direct cabinets on capacity considerably lose angular which are 2-3 modules fastened together. Only diagonal furniture which also represents only one cabinet can concede on spaciousness to direct designs. Spaciousness degree also depends on absence/availability of additional shelves and boxes.
Angular furniture can consist as of free-standing products, well built in floor, walls or ceiling. In the latter case modules do not have that part of design (wall, roof, bottom) which is replaced with part of the room. It allows to reduce considerably the cost of furniture and to make it integral, without slots and gaps. Also fitted cupboards differ in the bigger capacity as the place is not spent for walls and gaps between furniture and the surfaces of the room.
Types of angular cabinets
Angular cabinets can look differently, but the design of the corner happens only three types. Transitional furniture is characterized by availability of cabinet on the place of corner which connects itself(himself) two other modules. Doors of such models open as well as at sliding wardrobe, but instead of wheels the turning gear is established. This furniture seems to more streamline. In cabinet adapter usually there is bar for hangers and regiments. Because of availability of the additional module the transitional angular furniture is the highest at cost. In fact are two direct cabinets, connected by angular office. The second option of design of such cabinets – connection of both modules at right angle. In this case the cabinet adapter is absent because of what furniture seems to more angular. Due to the lack of the third cabinet the design takes less places, but becomes not such capacious. It is the most uneconomical design as the angular space is just lost without any sense. Diagonal cabinets differ in the accuratest design – all front part is located on diagonal and represents the integral compartment which does not have corners. Most of all such cabinet is similar to angular shower cabin. It is better to put these mini-clothes in the large room because the design of such furniture seems bulky and can visually reduce the room. Because of the fact that the diagonal cabinet represents the uniform module it is the cheapest of angular cabinets. Doors at cabinet furniture the most expensive part, and in such design door only one. Despite big internal space of diagonal cabinet, it is necessary to adapt to it to use fully. All regiments of diagonal design are along walls, to the most distant it is difficult to reach because of rack with hangers.