Interroom doors carry out not only functional task, separating one room from another. They are important part of interior. Choosing doors, it is necessary to consider not only their design features, but also exterior.
Frame doors
Interroom doors happen two main types — the frame and made of the massif wood. The wooden frame from bars is the cornerstone of frame doors. On this frame from two parties sheets fibreboards or MDF are fixed. Apply decorative coat on them. It can be the laminating film imitating wood structure, natural interline interval or paint.
Internal emptiness most often fill with cellular cardboard which has to stiffen design. The shortcoming is obvious — similar doors have low durability therefore it is easy to break them. Their main advantages — the low price and small weight.
There is more reliable type of frame doors. At them there are no emptiness, and the internal space of framework is filled with wooden bars or plate of chipboard. Such doors turn out heavier, but they it is stronger and more reliable hollow.
Types of finishing of doors
The doors revetted with fibreboard or MDF need upclassing. The simplest option — coloring. Such doors can attract with low price, but during operation paint can be scratched and peel off that will lead to loss of attractive look. However, such doors give in to independent repair — they can be painted in house conditions. Many prefer to buy the laminated doors. The technology of their production is quite simple — the film imitating texture of tree is applied on cloth. Similar doors look rather beautifully and cost not much that results in their natural popularity at buyers. The laminated doors have also shortcomings. In case of damage of film it is almost impossible to restore initial exterior of door. If the door has been collected with violation of technology or has inflated from the increased humidity, on covering there can be bubbles of which to get rid very difficult. At intensive or long operation the drawing on film can be erased. The shponirovaniye is considered the most noble type of finishing. On surface of cloth paste thin layer of natural wood, usually valuable breeds. The similar door looks so as if it is completely executed from the massif of beech or oak, but costs at the same time much cheaper than integral. The main thing upon purchase of such doors is to choose qualitative factory product. If the door is collected in handicraft conditions or with violation of technology, the interline interval can peel off.
Doors from the massif
Doors from the integral massif of wood deserve separate mention. If you want to choose the best doors, then it is worth stopping on cloths from the massif. The tree is natural and reliable material. At the correct processing it looks very beautifully. Qualitative timber doors at due leaving are capable to serve to you decades. The doors made of solid wood of valuable breeds, for example, of oak, ash-tree or beech are especially appreciated. Such wood not only is beautiful, still it has high strength. But many noble breeds of wood do not forgive the mistakes made when drying, processing and storage therefore it is worth getting the doors made by reliable producers. The great demand is observed on door from solid pine. This coniferous breed has number of advantages — it is easily processed and costs very not much. By means of mordant and varnish the pine can give type of wood of valuable breed. Unfortunately, pine quite soft. Therefore it is sensitive to mechanical damages and demands care. It is worth avoiding acquisition of cheap unpainted doors from pine which often are on sale in the construction markets and in hypermarkets. Such doors sometimes are made of low-quality wood. It can be badly dried that will lead to its buckling after installation. And qualitatively it is very difficult to paint cloth in house conditions.