In the course of finishing of porch it is necessary to ask question of what material it is better to use for this purpose. If you have decided to choose tile, it will be required to consider several important factors. Special attention needs to be paid on mechanical characteristics.
The main criteria for selection of tile for porch
When choosing tile for porch it is necessary to pay special attention it to mechanical characteristics. For a start it will be required to determine its hardness by special scale. On tile surface in turn carry out by different natural materials, starting with the least firm. At each developing of scratch certain number is assigned to tile. By the way the brilliant tile is much more subject to scratches, than opaque. It means that the option with gloss is definitely not suitable for porch.
Significant factor when using tile is its abradability. Usually the wear resistance of material is always affixed on packing on scale from 1 to 5. It turns out, the number is higher, the resilience to abrasion is more. As for slip coefficient, on this factor surely it is necessary to take into account. Therefore at acquisition it is necessary to take an interest at the consultant what degree of resistance to sliding of tile. The tile with the maximum indicator of resilience will be ideal for porch.
Material for finishing should not be afraid of frosts. If on packing with tile there is no snowflakes badge, it is not recommended to get it. It is unlikely it will be suitable for street application. Also the tile which is laid out on porch has to be really resistant to negative impact of the environment. Therefore the tile with marking of "AA" will become preferable option. Such option differs in impressive resistance to chemical and other environmental activities.
Porcelain tile is right choice
For porch it was succeeded to deal with the main requirements to tile, but also it is important to pick up the correct material. The best option for facing of street surfaces, is the tile from porcelain tile. But for horizontal surfaces after all it is better to use rough material. The tile of porcelain tile is made of such materials as clay, kaolin, feldspar and quartz sand. The main difference of this material from others is that it is produced under big pressure at very high temperatures. It has caused the increased durability and resistance to negative temperatures of keramogranitny tile. Often producers release such tile not less than 12 mm thick. By the way it has the maximum life cycle.