Presently the mixer gains design value more and more, than utilitarian. Modern mixers are allocated with ability to regulate water flow or even to remember the previous temperature.
Thanks to the huge choice in shops you will not have problems with the choice of this device in various parameters. There is opportunity to choose the mixer both for kitchen, and for the bathroom. Once thanks tells designers and designers for the wide series of these products with various accessories intended for broad category of buyers. Let's talk about the choice of the mixer intended for the washbasin. On what first of all to pay attention?
In tandem with sink
It is necessary to consider features of sink. There are key parameters:
Bowl height. The mixer with highly located izlivy will be ideal for deep bowl (from 250 mm). For bowls average and small depth buy the mixer of the average size. If you want comfort, then we recommend to stop on the choice of the mixer with high izliv. So you will save yourself from splashes.
Sink depth, that is length between the far-away and near country. Ideally - 45-65 cm.
Sink width. Optimum size is 50-65 cm. Besides, we want to avoid splashes, - we choose the widest.
Each model of sink needs the mixer. You want constructive and style compliance — establish and choose them at the same time. To save itself from choice problem, choose the producer releasing the mixer and sink in one set. Usually, it is the German companies.
Place of dislocation
On side. The most popular choice because most of people get to themselves sink with one install opening. Such option the most convenient.
On wall. Such option provides fastening directly to water supply system pipes. In that case in sink in general there can be no opening.
On table. Budgetary, but at the same time quite graceful choice. Mounting is made by means of openings in table-top.
On floor. Perhaps, the most difficult and expensive option. Pays off only with the improbable elegance and mode. Such plumbing provides making of pipes with water in floor.