Where to put chemicals in the frame pool

Where to put chemicals in the frame pool

Frame pools are excellent alternative to natural reservoirs: to small rivers, lakes, ponds. Their advantages were estimated long ago by owners of country houses and dachas, but do not deny obvious: to bathe in crystal-clear water, it is necessary to know rules of care for the pool.

The frame pool on the site of own house is recognized pleasure, but its owners know that they demand special care. First of all it is cleaning of organic and inorganic garbage. Usually such artificial reservoirs are established on open space. It allows water to get warm under direct beams of the sun. At the same time on its surface dust, atmospheric precipitation which traces settle on pool walls gets. It is possible to learn about pollution on color of water: it changes, gets dairy or greenish shade.

Chemical treatment of the frame pool

It is possible to fight against pollution to which pools are subject in two ways: by means of filters and special chemical means for cleaning. If to apply several medicines in complex, then cleaning will take place more effectively and easier. Chemicals for the frame pool have to contain active oxygen, bromine and chlorine. Use of active oxygen will bring to 100% result, with its help all bacteria, without harm to the environment and the person will disappear. Chemical is added to water, but the pump when processing has to work about 7 hours, after that rearrange reverse in the mode to wash out the filter. Further to look after the device according to the instruction. Bromine not less effective, but does not give guarantee of total disappearance of bacteria. It has no smell, but at the price is more expensive, than chlorine. The cheapest medicine – chloric, but has the shortcomings: pungent smell and provocation of allergic reaction. It is good to use the chlorgenerator in which fill up salt. The device is installed in the pool, and after electrolysis reaction salt turns into chlorine, perfectly disinfects, and water becomes as in the sea. In complex at you the circulating cleaning pump has to be established. Hydrogen peroxide is characteristic quickly disappearing smell, but liquid with high concentration can cause burn. 35-37% water solution in number of 700 ml on 1 CBM of water is filled in directly in water. Container with this chemical is established densely to pool side. At removal of cover from canister your hands have to be protected by rubber gloves. Then lower narrow rubber hose in neck, and bring the free end on 200 mm to nozzle of circulating pump. Pumping of peroxide will happen instantly if pressure in the pump sufficient. Throughout all chemical processing the device has to be active.

Rules of storage of chemicals

It is better to store means for cleaning of the pool in densely closed original packings or plastic boxes in the dry aired rooms. Concentrates need to be added to water at once. It is not necessary to throw granules and tablets into the pool, and to bring to powdery state and to put in special floats. Not to mix chemicals, different in structure, among themselves. Thanks to consecutive and competent actions, your pool will always look hygienic and clean and attractive. Knowledge of appropriate use of chemicals will allow to eliminate all traces of pollution in due time.

Author: «MirrorInfo» Dream Team


Print