For full development of children it is necessary to give them not only information, but also its evident, material embodiment. So, geometrical figures which can be considered and touched will be the good manual. For example, the cone sewed by mom (or even dad) literally in 10 minutes.
It is required to you
- Fabric, paper, pencil, ruler, scissors, threads, needle, sewing machine, sintepon
Instruction
1. Buy or find in "grandmother's chests" fabric of bright color or with interesting to the child, the accurate contrast drawing. It is desirable that material was natural and rather dense. Cotton or a flannel will be ideal for these purposes.
2. Make a pattern on the sheet of paper. Draw a vertical line 21 centimeter long. To the right and to the left recede from it about 45 degrees and also note distance in 21 cm connect all three points the smooth line. The second detail is the basis of a cone. For it the circle with a diameter of 8 cm with an allowance for a seam of 5 mm is necessary. Cut out patterns from paper and pin them pins to inner side of fabric.
3. Circle details on material small. Remove paper curves and cut out fabric parts of a cone.
4. That part of the basis of a circle which is intended for allowances make an incision scissors on 3 mm towards the center of a circle (approximately each 1.5 cm). Thanks to it fabric at sewing together will not puff up. Tack a circle to a triangular detail approximately on 2/3, stitch this distance on the machine.
5. From inner side sweep away the parties of a cone, and then stitch. Turn out a hand-made article on the face.
6. Fill a cone the sintepon (torn on small pieces) or solid filling for toys. Sew the remained site of the basis of a cone manually small loopy otmetochny stitches.