Finishing of a ceiling a tile – a widespread type of repair work. It is possible to execute it own hands, But before it it is necessary to study attentively a question as it is correct to glue a ceiling tile. There are no special difficulties here, but there are some nuances.
As it is correct to glue a ceiling tile: general recommendations
Before work it is necessary to prepare tools:
- stationery or usual very sharp knife;
- big ruler;
- slate pencil;
- gun for putting glue;
- level;
- fabric cut for removal of smudges of glue;
- rope.
Glue for a tile should be chosen attentively. Best of all liquid nails in a tuba will approach – from it more convenient to fill a gun. It is possible to buy such structure in any shop of building materials.
That whom the question interests as it is correct to glue a tile on a ceiling, it is necessary to know that it is necessary to mount it on previously cleaned surface. From a ceiling delete old wall-paper, paint, putty. If on a ceiling there are cracks and roughnesses, then they need to be zashpatlevat.
Further it is necessary to define quantity of a tile which is required for finishing. It is possible to calculate it, having compared the sizes of the room and the sizes of squares. It is better to buy material with a stock. Later it is necessary to decide on way of a pokleyka. Rather often the tile is also mounted on diagonal, rhombus, is more rare from a corner.
How it is correct to glue a ceiling tile on diagonal?
Such way of laying of squares allows to hide curvature of walls and also to make an interior more original. In the beginning two pieces of a rope should be stretched from one opposite corner to another. On the place of their crossing there will be a center of the room. From here it is necessary to begin to glue a tile. It is necessary to put a marking carefully: to draw through the center two perpendicular lines – from the middle of one wall to the middle another. The first square is pasted precisely on the center that its corners coincided with the drawn lines. The tile should be smeared with glue by means of a gun and for several minutes to press to a surface. Now we paste other tiles along axes up to the end. And between them it is mounted other elements, filling all free space, if necessary cutting the whole tiles on pieces of the suitable size a stationery knife. We close up seams by means of silicone sealant and we paint over water emulsion.
How it is correct to glue a ceiling tile a rhombus?
The way of gluing by rhombus is very similar to previous. Only begin installation in this case a little in a different way. The first square is pasted not on crossing of razmetochny lines, in between them – that one of corners was sent to the center. Be near to paste three more tiles that everything together they formed a rhombus. And further continue to stack squares on the planned diagonal lines.
How it is correct to glue a ceiling tile from a corner?
If the room has the asymmetric form, then experts advise to apply a way of laying from a corner. It is necessary to begin from a corner opposite to an entrance and, moving along a wall, to gradually fill free space.
How it is correct to glue a seamless ceiling tile?
The seamless tile has the special surface allowing to hide completely places of joints between separate elements. As a result the ceiling looks as an integral monolithic design. That such tile laid down exactly, the ceiling after cleaning should be grounded. Any can stack squares of above the specified ways. Edges of tiles should be adjusted very precisely, otherwise to be violated the drawing. At the end it is necessary to remove very carefully acted glue with a clean rag.