It is reliable to protect housing from thieves only the good entrance door will help, but, it is not so simple to get it as it seems at first sight. Modern shops offer so good selection that it is possible to get confused in it very easily, and the sellers who in eager rivalry are praising highly the goods will hardly tell you about all shortcomings of any given model. Therefore, let's take a professional advice how to choose an entrance metal door. It will help to find inexpensive and qualitative option.
How it is correct to choose a metal entrance door?
The first to what it is necessary to pay attention, it to what steel sheets are used by production of a cloth. The best option is considered if they are integral, that is on the cloth there will be no seams or fastenings. It is heavier to break such doors and they maintain big impact loads, than those that are created from pieces of steel.
The second difference of a qualitative door from not too safe, is platbands. They have to be present, and, the more densely they will adjoin to a box, the better. Platbands guarantee that the cloth cannot be broken out by means of the ordinary tool whereas doors without them cannot brag of such advantage.
And, at last, pay attention to whether the model has antechurches, they also interfere with breaking of a door as do not allow the malefactor to push scrap between a cloth and a box.
Having picked up model which has platbands, antechurches and also it is created from a whole steel sheet, it is possible to start further assessment of quality of a door.
How to choose a good entrance metal door?
Now it is necessary to start assessment of the most steel sheet. It is considered that domestic doors are more reliable as at them 4 mm red-hot steel, which are used not that a sledge hammer, but also the Bulgarian will not take. Foreign production of a cloth, as a rule, are created from the facilitated metal which can be damaged even scrap. Therefore, it is reasonable to choose a domestic entrance metal door both, and it is more economical, their cost will be often lower. However, the weight of domestic cloths is too big therefore consult with the master whether the similar design in a doorway of your apartment or house will be able to be established. If it is not possible, for example, walls too thin, then choose models where the sheet of steel will be at least 2-3 mm of thickness.
One more rule, following which you will be able how to choose a qualitative entrance metal door for the house, well confident in the safety says that it is necessary to buy only models with internal edges. These are special designs which do a cloth to even more resistant to damage.
How to choose locks for entrance metal doors?
Upon purchase of the lock, it is necessary to pay attention to existence of a bronenakladka. Criminals quite often beat out the lock by means of the ordinary hammer, and the bronenakladka will not give it to make therefore you will be protected from such way of breaking.
Also pay attention that experts recommend to put 2 similar locks on an entrance door at once. It is connected with the fact that any lock is not completely protected from criminals, that is it is possible to open without the aid of a key any model, all difference in that, how fast it will be made. Existence of the second mechanism will cause that the criminal will be forced to spend bigger time for breaking, and it can promote that it will be noticed by neighbors or passersby who can frighten off it.