Many people face a problem that the accumulator on phone is quickly discharged. Hours on the Internet, listenings of music and viewing different video, all this negatively affects a condition of charging. In that case it is possible to buy the external accumulator for the charger which will allow to carry out recharge in any place. The small device easily is located in a pocket that gives the chance to carry it constantly with itself.
How to use the external accumulator for phone?
If you bought this device, then it for a start it is necessary to load properly. For this purpose there is a special socket where the cable is inserted. Charging is in most cases carried out by means of the computer, and on process several hours leave, everything depends on the capacity of the accumulator. On the device there is a special indicator which helps to control charging level. It is possible to use the power supply from phone to charge the external accumulator for mobile from network. In that case time is considerably reduced.
To recharge phone which shows that it will soon be switched off it is necessary to connect it to the special socket. Process will begin at once or it will be necessary to turn on the button on the device, everything depends on the chosen model. Do not forget that the external accumulator demands regular recharge.
How to choose the external accumulator for phone?
There are several criteria which will help to choose the high-quality device:
- Device capacity. This information can be found both on the device, and in the instruction. This is measured to seem in mAh. It is important to consider that the amount of energy which the additional accumulator can give is, less, than it consumed. Usually losses are about 25%. Considering the capacity of modern gadgets, it is recommended to give preference to accumulators with a capacity about 3000 mAh. Remember that the most powerful external accumulator for phone cannot cost little therefore give preference to the checked producers.
- Current at the exit and an entrance. The first parameter is necessary to define the device with what speed will be able to charge phone. For the majority of modern smartphones it is enough of 1 A. The second indicator, that is current on an entrance, means with what speed the external accumulator will be charged. This indicator depends on device capacity.
- USB sockets. Reflecting on what to choose the external accumulator for phone, it should be taken into account one more parameter – the number of USB sockets which equipped the device. Powerful devices usually have two exits, so, it is possible to charge two devices at the same time. Many producers do these sockets with a different current.
To understand what it is better external accumulators for phone, we will understand additional opportunities of the device. Most often producers complement such devices with a small lamp which can be useful in some situations. Today it is possible to find the external accumulator with the solar battery. Similar counter, most likely, is connected with a subject popular recently – economy of electric energy. The device from the sun long enough therefore, it is impossible to call the solar battery too useful addition will be charged. There are accumulators with Wi-Fi the router and Wi-fi storage of data which at connection to the Internet can distribute it to other devices.
As for color, design and a form of the accumulator, each person can choose the device depending on own preferences. Some producers offer external accumulators of unusual forms that will become a fine gift for any person.