To cut a lawn quickly and with little effort, the trimmer was constructed. When using this equipment it is necessary to make sooner or later replacement of a fishing line which is the basic cutting element. That there were no problems, it is necessary to know how it is correct to fill a fishing line in the coil.
For a start it is important to choose correctly a fishing line taking into account model of the trimmer and type of works. Key parameters by which it is worth being guided: diameter and section. The first value has to be selected for concrete model, and it is specified in passport data. Section is selected depending on a type of works, so for a young grass the round section, is suitable for more rough plants – a square and pentahedral fishing line.
How to fill a fishing line in the trimmer coil?
Not to break the device, it is necessary to consider some rules for gas station that will allow to receive good result and to cope with work in 15-20 min. Understanding how to fill a fishing line in the electrotrimmer coil, it is necessary to begin with extraction of a nozzle from a reducer. For this purpose it is necessary to connect the side opening located in the lower figured washer and dredging on an axis. Insert the screw-driver to prevent scrolling of a shaft. To turn off a nozzle, turn it to the right side. For extraction of the coil, it is necessary to disassemble the case. In the majority models the cover fastens by means of fixers which need to be drowned in the case, and then, to wring out edges of a cover. Consider that if the fishing line moves in the automatic or semi-automatic mode, then when dismantling the spring can take off therefore details need to be supported accurately. As coils are different, we will consider the main options.
If in the trimmer the coil which has a through opening on the internal and external case is used, then pass a fishing line through both holes and collect the coil. To make winding of a fishing line, it is necessary to turn the button which is usually used for its release.
Let's understand how to fill a fishing line in the coil working with one cutting element. This option is the simplest. In the coil it is necessary to find the opening allowing to fix a fishing line. Insert into it its end and begin to reel up, moving in other direction concerning rotation of the coil. On some coils there is an arrow showing the right direction. Necessary length of a fishing line directly depends on the coil sizes, usually it is 2-4 m. It is necessary to leave rather big piece of a fishing line not recorded that it came out. In the coil it is necessary to find the groove intended for fixing of the end of a fishing line. If it is absent, then hold the end with hands. Put on the top part of the coil, passing the end of a fishing line throughout a special opening. It was necessary only to install the coil on the lawful place.
Now we will find out how to fill a fishing line in the trim coil with two cutting elements. In the coil there can be one or two flutes for short moustaches what the principle of work depends on. If a groove one, then wind off 2-4 m of a fishing line and pass it throughout a through opening that it divided a fishing line into two parts, identical on length. Being guided on the specified shooters, winding of two parts of a fishing line is made at once. Leave the small ends and clamp them in grooves or hold them hands. Put on the external case of the coil where there will be two openings for each end.
In case flutes two, then it is necessary to fold the measured piece of a fishing line double that the eyelet turned out and to insert the place of a bend into the groove located between flutes. Reel up two fishing lines at once, having them in the flutes. Farther assembly, is carried out, as in the coil with one flute.